MISUZU, a pioneer of ultra-fine wire
It is used as internal wiring for smartphones and personal computers, as well as in medical fields for devices such as stomach cameras and endoscope cables. This conductor is capable of withstanding thinness and providing strength by using alloy wires.
We suggest the most suitable copper material and plating type for your particular application.
- We have shipped AWG50 (7/0.0095mm) and mass-produced AWG48 (7/0.013mm).
- Copper wire, copper alloy wire tin-plated, silver-plated are possible.
- Excellent straightness and dimensional stability.
- Small lot production is possible, and it can correspond to various prototypes.
Example of use
- Medical probe cables (Ultrasound diagnostic equipment, Endoscopes)
- Ultra-fine coaxial cable
- Sensor
- Robot
Ultra-fine wire (Single wire)
Optimum copper and plating materials are selected. We have used it as a conductor for shielding, such as medical care, robots, etc.
Main specifications
(specifications other than the following are also available for consultation.)
| Main Products (mm) | 0.025 0.03 0.04 0.05 … etc. |
| Material | Bare annealed copper Oxygen-free copper Silver plated copper Alloy wire (with tin / silver) Hard / Soft Plating type (tin, nickel, silver) Stainless steel |
| Production bases | China (Dongguan), Laos |
| Mechanical properties | Elongation: Hard 4% Max Soft 5% Min Tensil strength: Hard 300 Mpa Min Soft 174 Mpa Min |
| Bobbin | DIN-80 DIN-100 PL-3 GP-3R … etc. |
Ultra-fine wire (Twisted wire)
Suitable for areas requiring the delicacy and high functionality of precision equipment, it is also excellent in space-saving support, and is widely used in medical, robots, etc.
Main specifications
(specifications other than the following are also available for consultation.)
| Main Products | 7/0.010 7/0.013 7/0.016 7/0.021 7/0.025 7/0.03 7/0.04 7/0.05 3/0.03 … etc. |
| Material | Bare annealed copper Oxygen-free copper Alloy wire (with tin/silver) Hard / Soft Plating type (tin, nickel, silver) *Center : Different sizes and interventions are possible |
| Production bases | China (Dongguan), Laos |
| Mechanical properties | Elongation: Hard 4% Max Soft 5% Min Tensil strength: Hard 300 Mpa Min Soft 174 Mpa Min |
| Bobbin | P-8 P-30 … etc. |
Examples of specifications
| Number of cores | Conductor size (mm) | Material | Tensil strength (MPa) | Conductivity (%IACS) |
|---|---|---|---|---|
| 7 | 0.013 | Cu-Ag Alloy | 800 Min | 65 Min |
| 7 | 0.025 | Cu-Sn Alloy | 650 Min | 70 Min |